King's Keep - Storage for Philips OneBlade 360 Kingdom Come II Limited Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Even the bravest warriors need to care for their tools; give yours the respect it deserves with its own rightful throne!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
This castle includes a print-in-place hinged drawbridge and comfortably holds and protects your Philips OneBlade 360.
This was my first attempt at a decorative design, I hope you get some use out of it!
Build
Printing
Designed to print in PLA, I tested all of the functional aspects with the default settings in PrusaSlicer.
15% Gyroid infill
2.0mm layer height
No supports needed
I found that my marble PLA really brings out the seams between the stone layers quite nicely
Assembly
Simply take the top of the tower with the battlements, and slide it on top of the tower base (the image below shows the correct alignment). The sconces and the corner guide pins will act to align it and hold it together. Exercise caution to avoid breaking the candles.
Though it's not necessary, feel free to add some CA glue to the mating surface if you'd prefer. This may be especially helpful if you like to use the battlements as leverage when opening or closing the trapdoor.
Usage
Operation
Simply use the drawbridge window as a handhold to pull the drawbridge open with your finger, and rest your Philips OneBlade 360 Kingdom Come II Limited Edition on its rightful throne!
The recess in the throne and the sconces above will keep it comfortably in place.
You can then freely close the drawbridge, which will be latched shut by the ornaments on the handrail.