Cute Birds

ℹThere is one version where everything is printed as a single piece, and another version where the birds and the tree trunk are separate. This allows you to reduce the number of colors per model to five instead of printing the entire model with eight colors.

ℹIf you prefer, you can of course use more than eight colors if you would like to experiment with additional color variations.

ℹ Tips for printing Multicolor:

• Filament: PLA

• Supports: Yes! Branch diameter 3 / On Build Plate Only

• Layer height: 0,2mm

• Wall loops: 3

• Infill: 15%

• Seam position: back

• Wall generator: -

• Detect thin walls: -

• Brim: Yes! only for the stand alone Birds not for the tree trunk

• BuildPlate: -

• Info‼: Do not scale the CuteBirds any smaller otherwise some multicolor parts won't print as good

------------------------------------------------------

❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.

------------------------------------------------------

Colors and filament I used (5 Color) Birds:

• PLA Matte / White

• PLA Matte / Black

• PLA Matte / Blue

• PLA Matte / Red

• PLA Basic / Orange

Colors and filament I used (5 Color) Tree trunk:

• PLA Matte / DarkBrown

• PLA Matte / LightBrown

• PLA Matte / White

• PLA Basic / Green

• PLA Basic / Orange

Colors and filament I used (8 Color) CuteBirds:

• PLA Matte / White

• PLA Matte / Black

• PLA Matte / Blue

• PLA Matte / Red

• PLA Matte / DarkBrown

• PLA Matte / LightBrown

• PLA Basic / Green

• PLA Basic / Orange

Or decide for yourself which colors and how many you want to use!

ℹ !This model is extremely filament wasteful please keep that in mind! Print this model only if you have a 3D-Printer that will not produce filament purge wastage!

------------------------------------------------------

ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!

(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)