Travel Backgammon Set - Multicolor & Small Printer Friendly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multicolor Backgammon set ready for AMS/CFS. Small printer friendly design with .3MF files included.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Here is a fully printable model of a Backgammon set, including the board, checkers (chips), and dice. The design is optimized for multicolor printing systems and fits comfortably on smaller print beds.
✨ Key Features:
Multicolor Ready: Designed specifically for multi-material systems. Whether you use Bambu Lab AMS, Creality CFS, or Prusa MMU, you can print the board and pieces in contrasting colors for a premium look.
Small Printer Friendly: You don't need a massive printer for this! The model fits perfectly on smaller build plates (compatible with Creality K1C, Bambu Lab A1 Mini, Prusa Mini, etc.).
Complete Set: Includes files for the board, player checkers, and dice.
Easy to Print: I have included the .3MF files with pre-configured settings to make printing as easy as possible. Just slice and print!
📂 Files Included:
.3MFproject files (Recommended for easy multicolor setup).
🔩 Hardware Needed (BOM)
To assemble the hinges, you will need the following non-printable parts:
2x M3x35 mm Screw
2x M3 Nut
🖨 Printing Recommendations:
Material: PLA works great.
Infill: 15-20% is sufficient.
Supports: Minimal supports required
Resolution: 0.2mm layer height recommended.