Home Assistant Voice + Anker Soundcore Mini Cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AnkerCube combines both devices into one clean and compact setup with cable management
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Short description
The built-in speaker of the Home Assistant Voice PE is okay, but with an Anker Soundcore Mini via AUX (3.5 mm jack) it sounds much better.
AnkerCube combines both devices into one clean and compact setup with cable management — while keeping full functionality.
Inspiration / Background
The idea started after seeing this model:
https://makerworld.com/de/models/1032196-home-assistant-voice-cube?designId=1032196-home-assistant-voice-cube#profileId-1015272
I liked the concept, but I didn’t want to print it because it was too wide for my setup.
So I designed my own version: more compact/narrow, but taller, and with a fully self-designed holder for the Anker Soundcore Mini.
What is AnkerCube?
AnkerCube is a 2-part enclosure that:
holds the Home Assistant Voice PE in the top part
integrates the Anker Soundcore Mini in the bottom part
provides rear openings for power + AUX cable routing
is screwed together after assembly (stable and service-friendly)
✅ All functions remain accessible (HA Voice PE & Soundcore Mini are still fully usable)
Files
ha-voice-pe-top.3mf → Top part (Home Assistant Voice PE)
voice-pe-bottom.3mf → Bottom part (Anker Soundcore Mini + cable routing)
Hardware (BOM)
Anker Soundcore Mini
M4 heat-set inserts
M4 x 6 mm screws, black, 304 stainless / A2 / V2A, hex socket, flat head
Matching hex key / Allen key
Optional:
2–4 rubber feet / felt pads for better grip
Assembly (Order)
Print the bottom part (voice-pe-bottom.3mf)
Insert the Soundcore Mini and route the cables (power + AUX to the rear)
Place the top part (ha-voice-pe-top.3mf) and screw it together
Insert the Home Assistant Voice PE and connect the cables
Done: a clean, compact setup — cables routed neatly to the back.
Print settings (same for both parts)
Nozzle: 0.4 mm
Layer height: 0.20 mm
Walls/Perimeters: 2
Infill: 15%
Supports: enabled (Tree/Organic)
Remixes are welcome — please link to my original and credit me as the creator. Commercial use is not allowed.