Crown of Hearts – 3D Printable Royal Tiara
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heart crown with arches and round tips. Internal Ø160mm. Size 170.29x171.2x56.98mm. Clean 3D printable model.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Standard Digital File License
Introduction
Crown of Hearts is a one-piece printable tiara featuring repeating heart arches and spherical finials. The geometry is optimized for FDM printing while maintaining sharp outer contours and clean curvature transitions.
Internal diameter: 160 mm
Overall size: 170.29 × 171.2 × 56.98 mm
Designed as decorative wearable or display piece.
Print tips
The bottom edge of the crown is rounded for improved comfort and user safety.
Due to the limited flat contact area, it is recommended to use a brim to ensure good build plate adhesion and print stability.
Successfully printed on MK3S without supports.