1 / 2
Duncan Butterfly Style Yo-yo Holder -- Hidden Magnets — zdjęcie 1
1 / 2

Duncan Butterfly Style Yo-yo Holder -- Hidden Magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a small container that will hold a Duncan Butterfly style Yo-yo. Lid and body have hidden magnets.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A small Yo-yo holder that will fit a Duncan Butterfly style Yo-yo. There are small hidden magnets in the lid and body that will need to be inserted during the print.

Hardware Needed: 3mm x 2mm magnets (need to be very strong)

Printed on an Adventure 5M Pro, 0.12 layer height, 0.4 nozzle, HS PLA

**To insert magnets during printing, in the slicer, pause the layer where the small hexagon magnet holes are first covered. This will pause at the beginning of the layer and allow for the next layer to cover the magnets after being inserted.

Ext. Body Dimensions: Height: 31mm, Diameter: 73mm

Int. Body Dimensions: Height: 28mm, Diameter: 59mm

Ext. Lid Dimensions: Height: 10mm, Diameter: 73mm

Int. Lid Dimensions: Height: 6mm, Diameter: 59mm

Tagi