1 / 1
Protective TPU Boot for Momcozy Glass Breast Milk Pitcher — zdjęcie 1

Protective TPU Boot for Momcozy Glass Breast Milk Pitcher

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protect your liquid gold! A flexible TPU sleeve to prevent chips and cracks on the Momcozy Glass Breast Milk Pitcher.

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a flexible protective boot designed for the Momcozy Glass Breast Milk Pitcher. Since the pitcher is made of glass, this TPU sleeve adds a necessary layer of protection against accidental bumps, chips, or cracks when setting it down on hard countertops or in the fridge.

It fits snugly around the base and provides extra grip and shock absorption.

Print Settings:

  • Printer: Creality Ender 3 V3 SE

  • Material: TPU (Flexible)

  • Slicer: PrusaSlicer

  • Layer Height: 0.16mm

  • Nozzle Temperature: 230°C

  • Bed Temperature: 50°C

  • Supports: Yes (Touching Buildplate Only)

  • Support Style: Organic

Speed Settings (Important): Printing TPU can be tricky, so I used a highly conservative "slow" profile to prevent jamming and ensure clean layer adhesion. I prioritized a successful print over speed. If you are struggling with TPU on a similar setup, try these speeds:

  • Perimeters: 30 mm/s

  • External Perimeters: 20 mm/s

  • Small Perimeters: 15 mm/s

  • Infill (All types): 40 mm/s

  • Bridges: 20 mm/s

  • Gap Fill: 15 mm/s

Notes:

  • Supports: I used Organic supports touching the buildplate to ensure the overhangs printed cleanly while remaining easier to remove from the flexible material.

  • Filament: Make sure your filament is dry before printing to reduce stringing.

Tagi