Neuroshima Hex board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom board for the game Neuroshima Hex 3.0
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 904
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Custom board for the game Neuroshima Hex (edition 3.0, other versions might need a different hex size).
I've always found the original board too large, and fiddly when it comes to removing a piece from the middle of the board.
This custom board has the minimum possible size, and has raised walls so that the tiles fit snugly once placed and cannot move. A placed tile can easily be moved or removed from the board by pressing one of the 3 marked corners, lifting the opposite side.
A filament swap is recommended after the layer height 3.2mm, so that the indicators are printed in a different color.
The file test_fit.stl is just a single hex, in case you want to check whether the tolerances are ok before printing the board. If it does not fit, the variable base_hex_width should be modified in the openscad code.
There is also a custom score tracker, since the original one is on the board itself. This one also requires a filament swap after the layer height 1mm.
The source openscad file is provided in case you want to modify some parameters like height. The code is not very pretty.