silly little valentine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i added a light
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I added a red LED in the heart that only works when the 2 rexies are "holding" the heart.
Everything is printed out of PLA. you can use whatever settings you want sinds there are no extreme forces at play.
3D printed parts:
2x rex
1x heart
1x main stand
1x lid
1x wemos clamp
HW BOM:
2x 10x3mm circular magnet
4x M3x6mm bolt
8x M3 hex nuts
9x 2.2x9.5mm screw din7981
1x wemos d1 mini
1x 5mm red led
1x 330ohm resistor
jumpercables
170 hole mini breadboard
side notes:
The wemos is way overkill for this, but its what i had on hand
If you solder the wires, you don't need the breadboard, but i didn't have my soldering iron with me
colors of prints don't matter at all, except for the heart itself, i suggest using a transparent plastic
the switches in the wiringdiagram ar the bolts and magnets. these just "detect" when the rexi is in place