Beaker Wire Clip – 3-Channel Wraparound Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wraparound beaker clip with 3 wire channels. Secured using a rubber band for stable lab use.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Overview
This is a wraparound beaker wire clip designed to organize and hold wires during lab work.
Unlike rim-mounted clips, this version clamps around the body of the beaker and is secured using a rubber band. This keeps it stable and prevents tipping or shifting while in use.
It features three separate wire channels to keep leads spaced, organized, and untangled during experiments.
Features
Wraparound design for added stability
Holds up to 3 wires
Secures with a standard rubber band
No hardware required
Low-profile and easy to install
Use Cases
Temperature probe wires
Sensor leads
Stir plate setups
Electronics testing with liquid baths
Classroom or DIY lab setups
Printing Notes
PLA works well
PETG recommended for higher temperature environments
No supports required
0.4mm nozzle recommended
3–4 perimeters for durability
Design Notes
The clip wraps around the beaker body and relies on rubber band tension to hold it securely in place. This allows it to adapt to slight size variations while maintaining a firm grip.
Designed to be simple, practical, and easy to reprint if needed.