1 / 4
Ultra-Compact Push Latch Mechanism (Paperclip + Pen Spring) — zdjęcie 1
1 / 4

Ultra-Compact Push Latch Mechanism (Paperclip + Pen Spring)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A very compact & durable push-latch mechanism using pin spring(s) & a paperclip, ideal for small spring-loaded drawers.

Ocena
5 / 5
Polubienia
31
Pobrania
343
Wydruki
0
Wyświetlenia
2120
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Compact Push-Push Latch Mechanism (Paperclip Actuator)

There are several 3D printable push-push latch mechanisms available online, but most either take up too much space or rely on fully printed actuator arms that wear out quickly.

For example, this popular design works well but is very large, making it difficult to integrate into compact builds:
https://www.printables.com/model/641660-latch-mechanism-v2

This other design is smaller, but the printed actuator arm is too flimsy and really needs its enclosure to function reliably:
https://www.printables.com/model/496329-push-push-mechanism/comments

I was originally inspired to explore this mechanism after watching This Old Tony build a metal version, and I wanted to create a compact, durable version optimized for 3D printing: 


Key Advantages of This Design

1. Metal actuator arm (paperclip)

Instead of using a 3D printed actuator arm, this design uses a bent paperclip. While fully printed mechanisms are convenient, plastic actuator arms tend to plastically deform over time, especially under repeated load. A steel paperclip actuator is:

  • Much more durable

  • More precise

  • Less prone to wear

  • Allows the overall mechanism to be smaller

2. Extremely compact size

The push latch mechanisms provided are optimized to be as small as possible while maintaining strength. After many test prints, I found that reducing wall thickness further caused parts to fail under spring load. The final single-spring version measures only: 12 mm wide by 10 mm tall. 

This is essentially the same diameter as the pen spring used inside it, as you can see in the image below:


Included Versions

This release includes three different configurations:

1. Single Spring Version (smallest)
  • Minimizes overall size

  • Ideal for small drawers or lightweight applications

  • Recommended to use two units, one on each side of a drawer

2. Parallel Spring Version (higher force)
  • Uses two springs side-by-side

  • Provides increased push force

  • Better for heavier drawers or objects

Ballpoint pen springs are relatively weak, so doubling them helps in more demanding applications.

3. Compact Parallel Version (optimized travel direction)

This version minimizes size specifically in the direction of spring travel.

It was originally designed for a compact drawer I made to hold my phone and wallet simultaneously, where space constraints were extremely tight.


Travel Distance

These mechanisms are currently designed for approximately 10 mm of push travel. The 25 mm pen springs used can extend up to ~15 mm unloaded, but usable travel is reduced when pushing against an object.


Future Versions

I’m already prototyping additional variants, including:

  • Series spring version for 20–30 mm travel

  • Combined parallel + series version with increased force and travel

These will be posted soon.


Hardware Required

  • 1 or more ballpoint pen springs (~25 mm long)

  • 1 paperclip (for actuator arm)


Assembly Instructions

Detailed assembly instructions are included in the Other Files section as:

  • PowerPoint presentation (.pptx)

  • PDF version

These show:

  • How to bend the paperclip actuator

  • How to install springs

  • How to assemble the mechanism


Customization

A fully parameterized SolidWorks file is included, allowing you to easily adjust:

  • Travel distance

  • Spring size compatibility

  • Overall dimensions

  • Mounting geometry

This makes it easy to integrate into drawers, hidden compartments, panels, or other custom mechanisms.


If you need a compact, durable, and reliable push-push latch, this design offers significantly improved strength and longevity compared to fully printed alternatives.

Tagi