Prusa CORE One/+ MMU3 3-Way-Splitter Prusa Fitting M5-4 (compatible with Lite version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa CORE One MMU3 3-Way-Splitter Prusa Fitting M5-4, avoids swapping tubes between MMU3 and regular use.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a 3-Way-Splitter, which is compatible with the Prusa CORE One/+ and the MMU3 Lite version.
Since the length of the original PTFE-Tube is 450mm the length of the two PTFE-Tubes is as follow:
1x PTFE Tube 4x2.5x40mm (between MMU3 and Y-Splitter)
1x PTFE Tube 4x2.5x357.3mm (between Y-Splitter and Extruder)
Additional parts required:
Print Settings:
print in upright position as shown in the shared picture
Material: Prusament PETG
Print Settings: 0.1mm FAST DETAIL
Infill
Fill densitiy: 100%
Fill pattern: Rectilinear
Skirt and brim
Brim width: 8mm
Support Material
Generate support material: Enable
Enforce support for the first: 25 layers