Einhell 18V HSW Power X-Change Mount (w/ Fusion 360 and STEP files!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your damn Einhell Chinesium charger on your HSW.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a backplate that uses M3 screws to attach to your HSW, as well as to your Einhell charger.
So, for attaching the plate to your charger, you will need
3 M3 nuts
3 M3x10 screws
To attach the plate to your HSW, you will need
3-4 M3 nuts
3-4 M3 screws
3-4 M3 nut inserts (print these, attach to wall).
I decided to leave the bottom most screw hole unused, seems strong enough without it.
First, place the M3 nuts into the backplate's designated nut recesses, you can secure them there by placing a screw into them, and screwing from the other side, this will pull the nuts tightly into their hexagon recesses. You can then screw the plate to your HSW, the centre spine of the T-shaped object has 4 M3 holes for this, I ended using only 3 of them.
You can then loosen the 3 corner screws that attach to the backplate's 3 nuts a bit, just enough so that that you can slide the back of the Einhell charger into those screws (it should have 3 holes for this exact mounting approach). See below.
