Ski an Snowboard edge tuning kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tune your edges like a pro. Good file holders are expensive or hard to find. Print your own!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tune your edges!
These file holders allow you to tune your edge like a pro. Instructions on tuning below.
I included file holders to tune your edges to 89° (most common), 88.5, 88 and 87 (super aggressive).
Printing in super cheap PLA worked great. One M8 50 screw is needed (and the files according to your needs).
Popular files are 100mm x 25mm and fit well. See the pictures.
These holders wear off after some time, wear indicators included to maintain accuracy.
Print with wear indicators down. The file holding area has a very little curvature to bend the files slightly to follow the curves of your ski or board better.
Happy riding!
Look how to do this here: