Foldable LENS CAP for Insta360 Go Ultra
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This lens cap snaps precisely to the Go Ultra standard lens and offers a lid that can be opened and closed easily for protection.
I was annoyed that the manufacturer does not include a solution like that by default so I made my own.
The little hinge uses a piece of 1,75mm filament as a hinge pin. You might need to clean the hinge holes using a small drill bit as it has a rather tight fit. Use superglue to secure the hinge pin on the outer parts of the hinge.
The fit around the camera lens is tight enough for it to stay on securely but it can still be pulled off easily if needed.
My Print settings:
Layer height 0,1mm
Perimeters: 4
Extrusion width 0,45mm
Nozzle 0,4mm
Material: PETG
Print Speed: 30mm/s (rather slow for max precision)