Hama Traveller 163 Tripod Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tripod adapter plate to work with Hama Traveller 163 ball head tripod. Printed in PLA and TPE.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
During an office clearout, I found two of these tripods in a cabinet. Unfortunately both missing the adaper plates.
After some searching online and printing out some incompatible plates for other Hama tripods I took matters into my own hands and made a very simple but functional adapter plate.
The main part of the plate was printed using esun ePLA-CF at 0.2mm layer height with supports.
The rubber pad was printed in TPE at 0.2mm layer height with 100% infill. I used double sided adhesive tape to stick the rubber pad to the main plate.
I reccomend buying the 1/4"-20 screw, they can be bought cheaply online. Alternatively, this model will work but heed the warnings in the description. https://www.printables.com/model/152911-camera-tripod-screw-14-20-unc