Specialty 3/4" bench dog
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a bench dog that could hold work that doesn't have parallel ends without marring it.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 688
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed a bench dog that could hold work that doesn't have parallel ends without marring it.
Working face has extra wide 1/2" tall face so I can stick a piece of template tape to it and keep work from sliding out when clamped with tail vise. It can handle a 30 degree offset from parallel pretty easily this way.
Print instructions
Category: Hand Tools Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Infill: 30-50, 6 perimeters
Filament: Paramount 3D PETG
Notes:
It prints on its head which is at an angle to keep the layers from lining up perfectly with the shear force of the vise, but it still needs a lot of perimeters. I managed to break my first one with 4 perimeters, but it took me throwing my whole 190 lbs into a fairly dull No. 6 plane for 20 minutes to do it. The second attempt with 6 perimeters is holding just fine.