Slim Centre adapter for LVVJ3D spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LVVJ3D spools have a centre hole of 75mm, too big for side of CoreOne so this slim screw on centre adapter will fix it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I needed to create this slim centre screw on adapter for the spool I bought from Amazon from maker LVVJ3D in china. It had a centre opening of 75mm which is too big for the centre spool storage of the CoreOne printer. The spools are also 60mm wide so this will also fit similar size of other spools as well.
So this will fit nicely to the side spool holder of the printer.
Print with good layer adhesion and PETG or better, PLA will not hold if you tighten the screw too much.
STEP included is you want to remake for something else.
The files provided are for personal use at your own risk. I make no warranties, express or implied, regarding the safety, reliability, or suitability of any printed models. You are solely responsible for verifying that any downloaded design is safe, functional, and appropriate for your intended use, including but not limited to material choice, print settings, and post-processing. By downloading or using these files, you agree that I am not liable for any damages, failures, or consequences resulting from their use.