1 / 2
Super Mario Piranha Plant (Multicolor/No AMS required) — zdjęcie 1
1 / 2

Super Mario Piranha Plant (Multicolor/No AMS required)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Super Mario Piranha Plant Use a lighter to make the leaves curved.

Ocena
0 / 5
Polubienia
58
Pobrania
210
Wydruki
1
Wyświetlenia
671
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

Super Mario Piranha Plant

Instructions:

Print the parts (you can print them with different colors or the same)

Parts Colors:

- The base should be brown/beige.

- The leaves and stem are green.

- The Head red.

- The mouth, tooth, and spots are white.

Assembly:

Glue is required to assemble this 3D print.

Start by gluing the stem to the pot.

Then glue the mouth so the side with three teeth is upwards, and then glue spots to the head (the spot sizes are different, so you will know where each one should fit).

And finally glue the head to the stem so the tongue and the three teeth are up.

Finally, using a heat gun or a lighter, bend the leaves slightly while they're hot (don't burn them) so they look like real leaves. And then glue them to the stem such that the small leaf inside the leaf is facing up.