Raspberry Pi Camera Popcorn Joint Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, freestanding popcorn joint stand for a RPi camera.
- Ocena
- 3 / 5
- Polubienia
- 23
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 889
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed a simple, freestanding mount for a RasPi camera with decent adjustability and wasn't really happy with the options I found, so I mashed this up. Not much to it, just print one base, one cup, one frame, and as many popcorn joints as you need. You'll need a M4 nut and bolt to attach the cup to the frame. The frame was modified from the original to accept (I think) every variety of RasPi cam and the various generic knockoffs (except that big night vision one, obviously).
If you want a super-sturdy base, I also created this 1/2" NPT adapter so you can use a cast iron floor flange: https://www.printables.com/model/160254-popcorn-joint-to-12-npt-adapter
Print Settings
Printer:
Kingroon KP3S
Rafts:
No
Supports:
No
Resolution:
0.24
Infill:
20%
Filament:
NovaMaker ABS
Orange
Category: Electronics