The Acorn by Slestak75
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The one true organic.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Acorn! The one true organic.
Comes in two flavors, fixed axle and unresponsive c bearing.
For the fixed axle you will need
2x printed halves
1x 4 mm x 20 mm stainless steel pin
2x mr85 response pads (or flowable silicone)
super glue
Print them out, use supports for the cup, add the response pads, rough sand the end of the axles, drop of super glue in the holes, glue it all together and wait a day.
For the unresponsive you need
1x unresponsive c bearing
2x slim 19 response pads
You will need to pause the print at ~18 mm height using a color swap or pause command in your slicer and then drop the nut into the recess and resume printing. Then once done install the pads, axle, bearing, and you are good to go.