Single part printable 32x32 pixel art frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single part printable 32x32 pixel art frame. Printed on Ender5 plus (merc1) Pixel foils used were 8x32 that we cheap on
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Single part printable 32x32 pixel art frame.
Printed on Ender5 plus (merc1)
Pixel foils used were 8x32 that we cheap on Aliexpress.
Foils attached to front mask using 6mm double foam tape.
central 5v power used and daisy chained to all 4 panels.
attachable box for a lolin node MCU - this is under powered for the number of LEDs so will upload another box at some point
There are a number of inserts around the back for mounting options,
When assembling it should press together and then secure with a few dabs of super glue, You can also use foam or gel tape if that is preferred.
The front diffuser can be made of a number of different things from paper to frosted Perspex, This one has a diffuse screen from an old broken TV cut to size.