Ø125 Ventilation one way air valve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap fit, supportless, 100% 3D printable, ventilation air vavle
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Snap fit, supportless, 100% 3D printable.
I used tiny bolts and nut to secure the membrane, but give it a tap in the 3 holse with a hot soldering iron to fuse them together permanently, if you do not have bolts.
Membrane should be just 2 layers thick, cross line pattern.
Works pretty well. Blocks most air, and creates little but some resistance to the fan. When outdoor is high pressure, it does rattle a litlle - at least with the filament and print thickness I used. You can sand lightly on the membrane to adjust resistance and to reduce rattle.
I scaled to 101% for a ultra tigh fit in the ventialtor.
Ventilator used: Sencys badkamerventilator Basic Ø125mm Timer CE https://www.praxis.nl/verwarmingen-airco-s/mechanische-ventilatie-luchtafvoer/luchtafvoer/badkamerventilatoren/sencys-badkamerventilator-basic-125mm-timer-ce/5324271
For more designs visit: https://funkyton.com/tag/3d-printing/
Category: Household