1 / 17
baseboard clips for wall and furniture legs — zdjęcie 1
1 / 17

baseboard clips for wall and furniture legs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I ran out of commercially bought baseboard clips while installing baseboard in my home. Instead of driving to the…

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
56
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

I ran out of commercially bought baseboard clips while installing baseboard in my home. Instead of driving to the store again, I cloned the part and printed a bunch.

You can find more details and compatible parts in my article: https://funkyton.com/open-source-basboard-clip-system/

Original product EAN: 8711449065568 and 8711449065544

Print advice: For optimal strength, print the wall clip on the side, small nozzle, wall count 1 and 100% infill to get a really layer cross pattern (see picture). For the furniture leg clips, I printed these on the flat bottom side down, this works, but the clip hook that grabs around the baseboard not as strong when printed in this orientation.

I had 100% success with PLA+, and 100% failure with standard resin. If you have a resin that hardens with some elasticity, I am sure that will work, my resin is extremely brittle and didn't allow for any flex what so ever, and the clisp snapped.

For more designs visit: https://funkyton.com/tag/3d-printing/

Category: DIY

Tagi