10 inch 2U rack mount for mITX + FlexATX PSU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combines an mITX board wiith its PSU on one 2U rack mount.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 586
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Using this model you can mount a FlexATX PSU + mITX board + PCIe card on one 2u rack mount. The OpenSCAD file is attached in case you want to remix this or customize it in other ways.
My build (aka parts that are tested with this build):
Jginyue B550i
ETASIS EFAP-S400 - please note that you probably need a 24pin (ATX) extension cable
Dell Perc H200
Disclaimers:
This insert exceeds 8.75"/ 222.25mm ("inner" 10") if you're using a PCIe card that has i.e. a heatsink
Temperatures a far from optimal because many components that generate heat are close to each other and there's not much space for airflow
It's basically guarenteed that there are better patterns that the one on the bottom lol
This build is optimized for the following model (hence the depth):
As always, if have any questions or feedback, feel free to leave a comment - I'm happy to learn and improve.