Magnetic Keychain Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here Are Some Models Of A Magnetic Keychain Holders. I Made Them Compatible To Fit Multiple Sizes Of Magnets.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here Are Some Models Of Magnetic Keychain Holders. They Are Great To Stick On A Fridge! I Made Them To Fit 6 Different Sizes Of Common Magnets.
These Are Sized To Print With PETG. If You Are Printing With PLA Please Re-Scale Them To 99% Or 98.5%.
Also There Should Be Enough Room To Glue Them In So They Don't Pop Out So Easily. If You Don't Already Have Magnets You Can Buy Them From Amazon For A Good Price.
Here Are The 6 Size Options For Magnets: 10mm x 1mm, 10mm x 2mm, 10mm x 3mm, 10mm x 5mm, 15mm x 2mm, 15mm x 3mm.