Moleskine Notebook AirTag Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple piece that I made to hold an Apple AirTag in the back of a standard 5"x8.25" Moleskine Notebook.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple piece that I made to hold an Apple AirTag in the back pocket of a standard 5"x8.25" Molekine Notebook.
I use these notebooks constantly for work and in my personal life, and I'm always worried I am going to leave them behind at a meeting in a restaurant or coffee shop or some other public place. I keep an Apple AirTag in the back pocket of the notebook as insurance, but the AirTag's depth would create a lump in the paper when writing on the side with the back cover. For the last couple of years I solved this with a hunk of cardboard the thickness of the AirTag that has a hole cut out to hold the AirTag snug. When the cardboard is inserted in the rear pocket of the notebook it allowed me to write with the notebook flat, no AirTag lump.
However, the combination of gaffer tape and cardboard felt a bit cheap, so I decided to 3d print a solution instead.
I designed this in TinkerCad with my daughter, and printed it on my Flashforge AD5X in PLA.
This is the first item I have ever designed and printed myself from the ground up, so I am very much open to suggestions here on how to improve it.
I've uploaded both the .STL and .3MF files. Feel free to tinker with them yourself and let me know what you changed. Thanks for reading and downloading!