GTA San Andreas hueforge

GTA San Andreas hueforge

3D Print Instructions

---------------------

Layer height: 0.050 mm

First layer height: 0.200 mm

Recommended: Layer loops: 1; Infill: 100%

Start with color: #f9f9f9

Color swap plan:

1. Start with #f9f9f9

2. Swap to #593f3b at layer 2 (~0.250 mm)

3. Swap to #645f5d at layer 6 (~0.450 mm)

4. Swap to #bc5a6d at layer 10 (~0.650 mm)

5. Swap to #a46f58 at layer 14 (~0.850 mm)

6. Swap to #8f7f77 at layer 18 (~1.050 mm)

7. Swap to #a29a90 at layer 22 (~1.250 mm)

8. Swap to #da889f at layer 26 (~1.450 mm)

9. Swap to #cc9a7f at layer 30 (~1.650 mm)

10. Swap to #b9b3ab at layer 34 (~1.850 mm)

11. Swap to #f7a8c4 at layer 38 (~2.050 mm)

12. Swap to #e5b794 at layer 42 (~2.250 mm)

13. Swap to #c9c7d2 at layer 46 (~2.450 mm)

14. Swap to #ece2c8 at layer 50 (~2.650 mm)

15. Swap to #2b1a18 at layer 54 (~2.850 mm)

16. Swap to #010000 at layer 58 (~3.050 mm)

Notes: Heights are approximate. Confirm in slicer before printing.

---------------------

Made by rezzad