Nilfisk One vacuumcleaner tool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Nilfisk One vacuum cleaner came with 4 attachments, 2 are stored in the vacuum itself. This holder is for the other 2
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Recently bought a Nilfisk One vacuum cleaner. This came with 4 attachements. 2 of them are neatly stored inside the vacuum cleaner which is really convenient. But the other 2 just kept laying around the house.
So i created a holder for those which can be hung in a convenient place.
I used a cleat system for hanging the holder to get a clean look:
Recommended Print Settings
Material: PLA
Layer height: 0.2 mm
Infill: 15–25% (Gyroid or Grid)
Walls: 3–4 perimeters
Supports: Required for the cleat hole
Print orientation: Flat on the top