1 / 5
Chunky Flavor Scoop 1:1 Copy - More Nutrition Chunkyflavor - No Supports — zdjęcie 1
1 / 5

Chunky Flavor Scoop 1:1 Copy - More Nutrition Chunkyflavor - No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A copy of the long Chunky Flavor scoop because sometimes they deliver a shorter one.

Ocena
5 / 5
Polubienia
6
Pobrania
121
Wydruki
1
Wyświetlenia
580
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

1:1 Kopie des originalen Chunky Flavour Löffels von More Nutrition mit exakt identischem Füllvolumen.

Ich habe meiner Freundin Halter für die Scoops in den Dosen gedruckt, leider sind bei vielen Dosen die  kürzeren dabei, welche dann in das Pulver fallen.

  • Der Scoop lässt sich komplett ohne Supports drucken. Einfach flach auf das Druckbett legen, die Innenbereiche werden sauber gebridged.

  • Wenn ihr Multi-Material drucken könnt (AMS etc.) - verwendet Baum Support mit einer interface Layer mit einem Material welches sich leicht lösen lässt für ein absolut perfektes Ergebnis.

Die Geometrie entspricht dem Original inklusive aller Phasen und Details. Der einzige minimale Unterschied: Im Inneren wurde eine Phase statt einer Rundung verwendet, damit der Löffel zuverlässig und sauber für das bridgen druckbar ist.

.step & .stl Dateien sind hochgeladen, sodass der Löffel bei Bedarf problemlos individuell angepasst oder weiterbearbeitet werden kann.


1:1 copy of the original Chunky Flavour spoon from More Nutrition with exactly identical filling volume.

I printed holders for my girlfriend so the scoops stay inside the cans, but unfortunately many cans come with the shorter versions, which then fall into the powder.

  • The scoop can be printed completely without supports. Simply place it flat on the print bed, the inner areas are cleanly bridged.

  • If you can print multi material (AMS etc.), use tree supports with an interface layer made from a material that is easy to remove for a perfectly clean result.

The geometry matches the original including all chamfers and details. The only minimal difference: inside, a chamfer was used instead of a rounding so the spoon can be printed reliably and cleanly for bridging.

.step & .stl files are included, allowing the spoon to be easily customized or further modified if needed.

Tagi