Niceboy ION Hurricane R3 Attachment rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple model to keep the attachements organised and close together
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Niceboy ION Hurricane R3 Wet&Dry vacuum doesn't come with any sort of organiser for it's attachments, so I made my own. It's very simple and easy to print, It doesn't need any supports. I printed mine from Prusament PETG but I suppose printing it with PLA should work too.
NOTE that there isn't a place for the little plastic adapter that comes with the vacuum to be used with the extension tubes and the flexible hose, I pretty much always keep that one in the extension tube. However if you want to store that attachement in the rack too you can. Just put the brush attachement on the adapter and then put the whole thing in the middle slot.
Hope it helps! :)