1 / 1
HÅG HAAG H05 Creed Office Chair Dampener Sleeve Bushing — zdjęcie 1

HÅG HAAG H05 Creed Office Chair Dampener Sleeve Bushing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dampener/bushing/sleeve for HÅG H05/Creed or I assume many chairs that they make

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Open Community License v1

I made this dampener/bushing/sleeve for my HÅG H05, as the original one was worn and, and it started to make a lot of noise because of the metal on metal. 

This also means, that the rod that holds the chair in place, was starting to wear, as well as the metal that has the bushing. I printed this using nylon PA, and it has worked out quite well. There is a large chance that this model would need to be redone for other chairs, as this is a bit bigger, because of the missing metal on my chair.

Printed with 100% infill, structural settings, supports on my Prusa Core One.

Feel free to clone it here https://cad.onshape.com/documents/b41b0edceee7fa140a4ca262/w/9c9317e4c0adac270432c623/e/686d49e2fc95bcc732ddfaeb

Tagi