Orbiter filament cutter - more metal version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a few tweaks to make the cutter a bit tougher.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This remix of Drop-Turtle's filament cutter adds a few bits of metal hardware:
a countersunk M4 screw as the pivot point instead of the original printed column
two 3mm OD/5mm OD/12mm length metal spacers are used in the mounting holes, to prevent the mounting pressure from squishing the cutter and interfering with the cutting mechanism
two holes for 3mm diameter x 2mm depth magnets are added to help hold the cutter arm, although I am not currently using them because I find the spring strong enough
I also changed the cutter arm a bit to take a slightly smaller blade as the ones I bought from aliexpress didn't quite fit. The original cutter arm from Drop-Turtle's model is compatible with my remix if your blade matches the original dimensions better.