1 / 6
Vintage VW Beetle Star Wars Imperial Cog Hood Ornament — zdjęcie 1
1 / 6

Vintage VW Beetle Star Wars Imperial Cog Hood Ornament

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The factory VW logo for my 74 VW Beetle was missing two of the rubber plugs that holds it in place so I went ahead and…

Ocena
0 / 5
Polubienia
12
Pobrania
62
Wydruki
0
Wyświetlenia
398
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

The factory VW logo for my 74 VW Beetle was missing two of the rubber plugs that holds it in place so I went ahead and removed it so I wouldn't lose it on the road. While I had it out, I decided it would be fun to make a custom logo.

To get the logo on, I used short 3mm screws and washers. It is attached from under the hood so its a little awkward to have to hold the logo in one hand and screw it on from around the hood underneath but its do-able. I did have to grind a couple half-moon clearance slots in the sheetmetal support under the logo so I could get a screwdriver at the two holes closest to the windshield but it shouldn't hurt anything long-term.

Category: Automotive

Tagi