1 / 3
Qidi Box Filament Savor (No tape required)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creates a better filament entry angle.
- Ocena
- 5 / 5
- Polubienia
- 112
- Pobrania
- 718
- Wydruki
- 11
- Wyświetlenia
- 2971
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 11) (Komentarze: 22)Remiksy (0)Kolekcje (186)Powiązane
I wanted to create a filament savor for the Qidi Box that doesn't require using any double-sided tape. I used ASA GF for mine. Materials needed-
m3 Heat Set Inserts- 2 per filament savor
m3x6mm socket cap screws- 2 per filament savor
PTFE tubing- 120mm in length per filament savor
I did have to remove the silver eyelets in order to install the PTFE tubing into the Qidi Box. It was very easy with a small flathead screwdriver.