Sv08 Orbiter 2.5 Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a new backplate and parts to fit the orbiter 2.5 into a Solvol SV08 printer.
There are a few things that you will need to buy for this upgrade.
will need 4x 4x5mm magnets https://www.amazon.com/dp/B075PMZ1J5
will need brass inserts 2x (M3x6H) 2x (M3x3H) https://www.amazon.com/dp/B0D5V3TZLB?th=1
will need brass insert 1x (M2.5x4H) https://www.amazon.com/dp/B0CS6YVJYD?th=1
will need a piece of ptfe tubing approximately 16-20mm Long. It slides through the board/hotend mount into the orbiter and flush on the spacer. https://www.amazon.com/dp/B0DKTCM99C?th=1
last the cover will need to be trimmed a little to fit the orbiter. the trimming is on the top side of the cover as shown in the photos. left side is 12x10mm and the right is 2x23mm
Your hot end nozzle will have moved -2mm on the Y axis but I would be safe and remeasure all offsets. I have a cartographer scanner on my sv08.