TSO Parallel Guide Cursor/Indicator v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the v2 parallax-free replacement for the metal cursor that comes with the TSO Parallel Guide system (Gen 1).
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
UPDATE: This is a new version of the model, with a slimmer base for even better visibility.
One of the most common complaints about the Gen 1 TSO Parallel Guide system is that the metal cursor makes accurate setting of the cursor very difficult.
This aims to resolve this issue by providing a sloped cursor that makes contact with the ruler to negate the parallax as much as possible.
Depending on your printer and settings, you may need to do some light standing for the best fit possible, I have tried to make this in a way to minimize that.
The through hole that is used to attach it to the TSO stop block has been expanded for some extra adjustability.
Print settings:
Would recommend max infill to minimize any flex and allow you to fine tune the dimensions with a file/sand paper as needed.
I've only printed it with PLA, so feel free to experiment with other materials to control the sheen etc.
This is my first file that I've designed, any feedback is greatly appreciated.
If you want these in other formats, please let me know, figured STL is the easiest to deal with