1 / 4
NAKED DAMPER, SILENTBLOCK, ANTI VIBRATION FEET for MK4, MK3, TPU, F3D file — zdjęcie 1
1 / 4

NAKED DAMPER, SILENTBLOCK, ANTI VIBRATION FEET for MK4, MK3, TPU, F3D file

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DAMPER, SILENTBLOCK for MK4. Material TPU 95A,

Ocena
0 / 5
Polubienia
6
Pobrania
36
Wydruki
0
Wyświetlenia
318
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

MK4 "Naked" Gyroid Dampers (TPU) - Anti-Vibration Feet

Summary

Sponge-like vibration dampers for the Prusa MK4 printed in TPU. Uses exposed Gyroid infill. Requires specific slicer settings (Vertical Shell Thickness OFF)!

Description

These are custom vibration dampers designed specifically for the original Prusa MK4. Unlike standard solid feet, these utilize the natural springiness of the Gyroid infill pattern printed in TPU to absorb vibrations and significantly reduce printer noise.

The design features an exposed infill structure acting as a cushion, while the top mounting plate remains solid to securely fit into the printer frame.

⚠ Print Instructions & Settings

HIGHLY RECOMMENDED: Download and use the provided .3mf project files. All complex settings are already pre-configured!

If slicing manually, you must follow these rules, otherwise the "sponge" effect will fail:

1. CRITICAL: Disable Vertical Shell Thickness You must uncheck/disable the setting "Ensure vertical shell thickness".

  • Location: Print Settings -> Layers and perimeters -> Advanced.

  • Why? If left ON, the slicer will try to build unwanted walls around the infill, making the part too stiff and ugly.

2. Global Settings

  • Material: TPU / Flex (Required)

  • Perimeters (Vertical shells): 0

  • Top layers: 5 (To create a solid cap)

  • Bottom layers: 0

  • Infill Pattern: Gyroid

3. The Modifier (Solid Latch) The top latch that slides into the MK4 frame must be solid.

  • Add a Modifier Mesh (box) around the top latch area.

  • Inside this modifier, force Perimeters: 2 (or more).

  • Without this, the latch will just be soft infill and won't hold the printer.

4. Infill Density (Stiffness) Due to the weight distribution of the MK4 (heavy back), print two versions:

  • Front Feet: 10% Infill (Softer)

  • Rear Feet: 15% Infill (Stiffer)

Tagi