Tray for Rummikub Tiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stable standing tray for Rummikub tiles.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 120
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
We have a very old Rummikub game at home that comes with really flimsy trays. This is a replacement tray for Rummikub tiles of the size 27mm x 19mm x 3.5mm.
Special features: The tray has a firm stand. It has flip out/in feet. It has end stops on the left and right side to prevent tiles from sliding off. It has deep grooves to hold tiles securely while still allowing easy removal.
Printing: Use a z-height of 0.2mm for best precision. The z-dimensions have been designed with this in mind. If your bridges are well calibrated, the tray can be printed without using supports. For print orientation check image 2.
Assembly: This is quite easy. Make sure to snap the L and R feet onto the correct pivot point as shown in image 3.