FlashForge Adventurer 5M (AD5M) Nozzle Case for Phaetus/No-Name Branded Nozzles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nozzle cases for Phaetus/No-Name branded nozzles that are compatible with FlashForge Adventurer 5M AD5M 3d printer.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I could not find any nozzle cases that fit the Phaetus and off-branded nozzles so I remixed Doug Joseph's nozzle boxes to fit these different nozzles.
Printer settings are the same as the original.
10% infill on lid
15% infill on base
2 perimeter walls
0.4mm nozzle
0.2mm layer height
The lids were also modified to support the wrenches that came with the nozzles.
I am also including sample models for each nozzle brand so you can verify the models work before printing the entire case,
In addition
In some of the pictures, I used a silver acrylic based paint marker to highlight the embossed text but the paint ran a bit so its not a perfect job.