12 Gauge Shell Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for 12ga shells that fits in common ammo cans.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 12 Gauge Shell holder for the MTM Ammo cans:
https://www.amazon.com/dp/B01MU6ZAPG
Instead of a pile of rounds, you can fit some of these shell holders, each holding 28 shells. Keeps em all tight and easy to pull out a batch...
How many you can fit in a can depends on the length of shells.
Honestly, its cute and fun, but 12g shells are fine just chilling in the can... you can fit about 110 2.75" rounds in the can, but only 84 with the holders... I mean, there is a bit of room left to drop some loose rounds in aswell, so total capacity is the same but... idk if its really worth it for ya.
Holds 168 of the 1" shells...
UPDATE: Seems yall enjoyed this lil project, so I added a few more models.
One model does not have the flare out at the top. Its got flat sides, so hopefully it can fit in other cans, but has the same tapered slope as the original.
The last two are rectangular, no taper at all, one is similar in size while the other is more narrow, holds less, only 24, but at 79mm, should fit in the metal ammo cans.
UPDATE 2: Added a small holder that holds only 8 shells. For 2.75" shells, you can fit 3 of the full 28 shell holders and 2 of the 8 shell holders for a total of 100 shells. It holds em pretty loosly cause there isnt much room after the 3 full sized holders, but it works.
UPDATE 3: Added a new model that specifically fiots the Plano 30Cal boxes. They have a ridge in the lid that would hit the top of the holder (and shells) so I removed 2 shells to allow for that ridge. Only holds 26 instead of 28, but the common plano boxes will close.