Coffee Aroma Diffuser / Scent Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coffee Aroma Diffuser / Scent Container
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Standard Digital File License
Coffee Aroma Diffuser / Scent Container (~100 mm)
A coffee aroma diffuser with a vented lid and a screw-on container. I use it mainly as a fresh coffee scent for a room, but it also works great with lavender, dried herbs, potpourri, or other fragrant inserts. The perforated pattern is designed to let the aroma out while keeping the contents safely inside.
Size: approx. 100 mm diameter.
If you need less capacity, check my profile — I also uploaded a smaller version.
What you can use it for
Coffee beans / ground coffee (fresh “coffee smell”)
Potpourri, dried herbs, other fragrance mixes
Features
Screw-on design (secure, easy to open/close)
Vented top + side ventilation for good airflow
Great for bedroom, office, wardrobe, drawers
General tolerances are already built into the model
Designed by me from scratch and printed/tested in real use
Print Recommendations
Material: PLA / PETG
Layer height: 0.2 mm
Perimeters: 2–3
Infill: 10–20%
Supports: not needed
Notes
Thread fit can still vary slightly between printers/materials. If it feels too tight, try a small XY compensation in your slicer or reduce flow a little.