Rotating Hanger for Ties, Belts, Necklaces, etc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotating hanger that is printed as two pieces and snaps together.
- Ocena
- 4,692 / 5
- Polubienia
- 158
- Pobrania
- 569
- Wydruki
- 15
- Wyświetlenia
- 2288
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Share Alike
Needed a space-efficient way to organize my ties and belts, so I designed this after seeing something similar being marketed in an online search. The hanger has a carousel that can be rotated to make it easy to consider what kind of snazzy you want to be today.
Very easy to print, use whatever settings you like, just note that the hook's snap fit end will likely benefit from using supports (but it will only be 3 or 4 small layers).
My print settings:
Standard Prusa PLA print settings with,
0.2 mm layer height
25% rectilinear infill (hook, for strength), 15% gyroid infill (carousel/hanger)
Support enabled
0.2 mm of elephant foot compensation