Tennis Ball saver/ pressurizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps 3 tennis balls fresh and bouncy
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 651
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on commercial tennis ball savers. Put up to 3 tennis balls in, screw down. You will need a 3.5mm thick o-ring in the groove. 65-70 mm internal diameter. lube it with a little vaseline. This creates an air tight seal so that when you screw down, the volume decreases and the pressure goes up. I used these o-rings.. https://www.amazon.com/dp/B0C81718Z4?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 I experimented with printing my own TPU o-rings, but didn't have much success. I printed with PETG. the gold accents you see in the picture were just a little extra modification done in my slicer.