Toilet seat tool with washers (Improved - V2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A general wingnut tool for toilet seats. Ours is awkward to get to so I made a tool to make that easier to get at.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 85
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't sure about the size of toilet seat wingnuts to I've oversized the fitment to hopefully cover a wide range of them.
Print with at least 3 walls and 20% infil.
And remember its' not metal, don't over crank this tool.
You will need a 15mm spanner or socket.
Update 22/02/26
So, when making plumbing tools I should apparently speak with my plumber bro. "Why did you make that with a 15mm hex?, we normally use a 17".
So, here is the updated version. This one has a standard 17mm hex AND a 10mm square. Ive added the little grooves too for your ratchet to lock onto ;). Further improved the business end by adding deeper and wider chamfers to the opening. This should make it easier to grab the nuts in the blind.
So without further ado and very much fuss. Here is version 2.
If you find my model useful, please consider supporting me: https://ko-fi.com/cinders_models