Volvo 850 Heater Control Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement Volvo 850 Heater temperature control knob (driver or passenger side). When I saw that most parts stores…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A replacement Volvo 850 Heater temperature control knob (driver or passenger side). When I saw that most parts stores wanted $26 for a replacement knob, I decided to make my own 3D-printed design. The knob is not an exact match, but is fairly close.
I noticed after installing and testing this version, that the knob does not fit into the control panel quite right. There needs to be a recess on the back side. I used a Forstner bit to drill out 2-3 mm on the back. I will try to upgrade the file in the future to fix the error.
Post-Printing
You can fill the slot (light guide) with epoxy or if you have a sheet of polypropylene laying around, you can use that to fill the slot and create the subtle lighting effect when the dash lights are on.
Category: Automotive