Stained Glass OneBlade Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for Philips OneBlade based on a medieval cathedrals stained glass windows
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Print Instructions:
0.2mm layer height for multi-colour prints
For the hatched glass insert, you will need to print it multi-colour, with clear glass PETG and Black PETG
If printing with clear PETG check out this guide for how to get clear results: https://www.printables.com/model/15310-how-to-print-glass
summary: print it slow (15-20mm/s) and hot (260C)
ensure adequate purge when switching from black to clear PETG
colours can be drawn on to the insert with sharpies (tip: put insert in place upside down and use the lines of the lid to guide where to colour in)
Lid and Box were printed in Overture matte rock PLA
print very slow on first layer and check to ensure it goes down successfully
NOTE:
if you can not print multi-colour a blank insert is included
if you do not have clear PETG print the "no insert" lid