Phenyx Pro Bodypack Belt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a reinforced belt clip for the Phenyx Pro wireless bodypack transmitter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Phenyx Pro Bodypack Belt Clip Reinforcement + Antenna Base Protection
The original clip tends to break quite easily, so I designed a more robust and durable version for everyday use.
In addition, I added a cylindrical protective guard around the antenna base to reduce stress on the connector and help prevent damage during active use, transportation, or accidental impacts.
Features:
Reinforced belt clip design for increased durability
Protective cylinder around the antenna base
Easy installation (snaps directly onto the bodypack)
Optimized for 3D printing without complex supports
Lightweight yet sturdy construction
Recommended printing parameters:
Material: PETG recommended (PLA is also possible, but it is less elastic).
Layer height: 0.2 mm.
Perimeters: 3–4 for strength.
Supports: tree-like, disable remove small protrusions.
Location: on the left side (without a window for the IR receiver).