1 / 3
Terrarium / Aquarium light lid for BIG JAR — zdjęcie 1
1 / 3

Terrarium / Aquarium light lid for BIG JAR

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lid with LED inspired by Baiosphere for Bormioli food jar. Since jars are not standardised the opening is about 90 mm.

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
90
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike

The design was inspired by the Baiosphere Terrarium Lamps. I ended up using some standard LED round module directly connected to a dimmable USB cable, but if you know your electronics better than i do i included a model with a hole for an eventual potentiometer.

In addition, the cable hole can fit a USB-C connector if you want to add a rechargable battery on the inside.

For the LED mount and window i recommend using clear PETG (i used rPET for mine) following the "how to print glass" guide. I think the result would be good even with some white PETG and minimal infill. 

Tagi