1 / 3
Civic Type R FL5 11th Gen MagSafe Charger Center Console Holder — zdjęcie 1
1 / 3

Civic Type R FL5 11th Gen MagSafe Charger Center Console Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is put a Magsafe charger over the existing wireless charger.

Ocena
0 / 5
Polubienia
1
Pobrania
36
Wydruki
0
Wyświetlenia
251
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

This is for a MagSafe charger that goes over the existing wireless charger in a FL5 (Civic Type R 11th gen). The piece just sits over the top of the existing wireless charger. Remember to turn off the existing wireless charger by holding down the buttons till the lights go off. I used the MagSafe charger in the link below. The MagSafe charger is press fitted into the center. Due to everyone's printer being slightly different, you might need to sand the center down a bit to press it in. I put a piece of sticky felt over the top of it to make it look OEM. I've been testing it for a few days and it works fine. The only issue is hunting for the exact spot where it sticks to the magnet, but you eventually get use to it. I plugged the charger into the cigarette lighter instead because it is off to the side. 

Magsafe https://a.co/d/0eTSrBIg

Felt https://a.co/d/0e30cGDk

Material: I recommend PETG, ABS, or ASA (PLA might melt, especially during the summer months)

Supports: No

Tagi